•View the PDF File
|
| A PRODUCT OF CRAFTMARK |
|
|
|
| PRODUCT: |
SPECMARK HT™ MECHANICALLY AFFIXED PIPE MARKER |
| DESCRIPTION: |
Craftmark's Specmark HT System (sizes A-C) are thermo-formed, precoiled polyester construction featuring the high temperature resistance and chemical resistance of polyester. Sizes A-C are sealed around the pipe with the use of the hitemp strip a shown in the illustration below. Sizes D-E are strap on type fiberglass carries with a sub-surface printed polyester face designed for installation with stainless strapping. All styles feature sub-surface printed graphics for humidity. abrasion and chemical resistance. |
| USE: |
For marking a variety of pipes including rusty, wet, damp, oily and especially dirty pipes. |
| PHYSICALPROPERTIES: |
Width: |
Size A,B 8.0 in.
|
 |
| |
|
Size C 12 in. |
| |
|
Size D 24 in. |
| |
|
Size E 32 in. |
| |
Thickness: |
Size A,B .010 in. |
| |
|
Size C .013 in. |
| |
|
Size D,E .090 in. |
| CHEMICAL PROPERTIES: |
Gloss: 135 units (20o) TEST |
| |
Excellent resistance to most petroleum solvents and low aliphatic alcohols, process chemicals, cleaning agents. |
| WATER RESISTANCE: |
Excellent |
|
|
| SERVICE TEMPERATURE: |
Sizes A,B,C |
-20oF to 248oF |
|
| |
Sizes D,E |
-20oF to 248oF |
|
| |
Note: Use of clear ployester lamination on sizes A-C insures temperature resistance. |
| EXPECTED EXTERIOR LIFE: |
Seven to Ten years, Vertical, Mid Continental United States. |
| |
|
|
|
| STORAGE STABILITY: |
2-2 1/2 years at 21oC (70oF) and 50% relative humidity. |
| COLORS AVAILABLE: |
Letters Black or White per ASME A13.1-1996. |
|
| |
Background Yellow, Green, Blue, Orange, Red per ASME A13.1, 1996 |
| |
Custom - All PMS Colors. |
|
| COMPLIANCE: |
Meets or exceeds ASME (ANSI)A13.1-1996 Scheme for the Identification of Piping Systems when used as a complete marking system. |
| |
| |
| PRECOILED POLYESTER PIPEMARKERS |
Craftmark's Specmark HT Pipe Markers are precoiled (Sizes A-C) with a built in memory that wants to grab the pipe and stay there. Craftmark uses only the most durable inks for indoor/outdoor use. These markers, when applied properly using the Polyester Hitemp Strip, will work on hot pipes up to 248oF. Use especially on pipes that are wet, rusty, dirty or where pressure sensitives won't work. Tighten marker around pipe by pulling on the outer flap of the marker. This will tighten the marker snugly around pipe. Then remove liner from clear ployester tail and apply. Press strip down securely to fasten. Sizes D,E are .090" fibeglass carries with high temp Duramark HT polyester marker adhered to the surface. Markers are designed to be secured to the pipe utilizing stainless steel banding. |
Customer Service Phone Numbers
Toll Free Voice (800) 627-5255
Toll Free Fax (800) 889-3147
Local Voice (817) 457-8753
Local Fax (817) 451-0637
E-mail csr@craftmarkid.com
Business Hours
Monday-Friday 8:00 AM CST to 5:00 PM CST
Map
US Headquarters
3212 S. Cravens Rd. P.O. Box 50668
Fort Worth, TX 76119Fort Worth, TX 76105
Credit Cards Accepted:
|
|
