Craftmark's Specmark HT™is designed for use in harsh environments, high temperatures and/or outdoor use. Craftmark guarantees these markers for 7 full years! The most durable marker available.
|
For Pipe Diameters 3/8"- 5/8" 4" marker width, 1/4" letters.
|
|
For Pipe Diameters 3/4"- 1 1/4" 8" marker width, 1/2"letters.
|
|
For Pipe Diameters 1 3/8"- 2 1/2" 8" marker width, 3/4" letters.
|
|
For Pipe Diameters 2 5/8"- 6" 12" marker width, 1 1/4" letters.
|
|
For Pipe Diameters 6"- 10" 24" marker width, 2 1/2" letters.
|
|
For Pipe Diameters over 10" 32" marker width, 3 1/2" letters.
|
| SPECMARK HT MARKERS PRICE EACH |
|
STYLE |
1-9 |
10-49 |
50-99 |
max # of characters |
|
AA |
5.90 |
5.35 |
4.91 |
20 |
|
A |
6.75 |
6.70 |
6.30 |
30 |
|
B |
7.16 |
6.69 |
6.38 |
20 |
|
C |
10.49 |
9.55 |
9.21 |
18 |
|
D |
17.56 |
10.79 |
10.64 |
18 |
|
E |
16.61 |
16.30 |
16.12 |
20 |
|
| Specmark HT Features
|
Craftmark's Specmakr HT™ Pipe Markers are precoiled Polyester/Tedlar™ construction (sizes AA-C) with a built in memory that wants to grab the pipe and stay there. Craftmark uses only the most durable inks for indoor/outdoor use. These markers, when applied properly using the Tedlar™ Hi-Temp Strip, will work on hot pipes up to 250°F. Use especially on pipes that are wet, rusty, dirty or where pressure sensitives won't work, Tighten marker around pipe by pulling on the outer flap of the marker. This will tighten the marker snugly around the pipe. Then remove liner from the clear Tedlar™ tail and apply. Press strip down securely to fasten. Sizes D and E, are .090" fiberglass carriers with high-temp Duramark HT polyester/Tedlar™ marker adhered to the surface. Markers are designed to be secured to the pipe utilizing stainless steel banding.
- Polyester/Tedlar materials provide the maximum UV protection in outdoor application.
- Tedlar surface coating provided maximum chemical resistance.
- Tough polyester base provides high heat resistance.
- Markers resists abrasion, chemicals, high humidity and the effects of outdoor weathering.
- Subsurface printed graphics coated with Tedlar provide maximum durability.
- Four precoiled sizes and two strap-on versions provide 100% ASME compliance on pipes from 3/8" thru 40".
- All Specmark HT meet or exceed ASME A13.1 Scheme for the Identification of Piping Systems.
- Strap-on versionS features .090" fiberglass carrier for superior durability.
- 360° visibility on all precoiled versions.
- No need to band or tape. Marker has self-stick Tedlar sealing strip to adhere marker to itself-not the pipe. (Sizes AA-C)
- Service Temp range of -40°F to 250°F.
Tedlar is a trademark of Dupont Corporation
|
|
P.O. Box 50668
